Best for or all conditions

SUPER NOVA COMBI

Seed drill

1 m
Working width
1 cm
Max stone size
1 hp
Power requirement
1 l/min
Need for hydraulics
1 kg/min
Output

Hydraulic rear harrow

Included standard with the machine is a hydraulic rear harrow, which operates independently on cylinders. You can choose the function of the rear harrow using a remote control unit in the tractor cab: Leave it down at the field ends. Have it follow the raising and lowering of the machine. Or, leave the rear harrow up, even when sowing, such as when direct sowing on a thick straw bed.

Precise working depth

Field surfaces are not always dead flat. The coulters must be able to follow any contours they encounter. Tume’s Nova Combi guarantees the most consistent furrows. The same technology can also be found on the new model: one front wheel steers two coulters, as needed. This has a positive effect, in that the front wheel compacts the soil and presses any plant residue before sowing. The coulter opens and closes the sowing furrow more reliably.

Hydraulic markers

Makes the driving line for next pull, don’t need to estimate.

ISOBUS controller

The Super Nova Combi is an officially approved ISOBUS-compatible seed drill. Remote control of fertilizer, seed and hay seed / starter phosphorus.

Spacious and simple coulter structure

In Tume rear wheel seed drills the transport wheel is always located so that it works as a compaction wheel at the same time. This enables spacious and simple coulter structure. By this solution we can guarantee at least 40 kg compaction weight on each seed row even in direct seeding and with maximum coulter pressure. This is more than what most of the others can offer with a separate closing wheel solution.

Compare Super Nova Combi models and choose

SNC 3000 SNC 4000
Working width, cm
300
400
Hopper capacity, l
4000
5500
Weight, kg
2,5–35
2,5–35
Tractive power requirement hp/kw
90/66
120/88
Dual-disc coulters
18 pcs, Ø 360/400 mm
24 pcs, Ø 360/400 mm
– Weighting range, kg
40–200
40–200
– Runtime weighting adjustment
Standard
Standard
Fertiliser/seed feeder
fluted rollers/pins
fluted rollers/pins
– Bottom valves
adjustable, spring-loaded
adjustable, spring-loaded
–Feeder usage
electric motors (4 pcs)
electric motors (4 pcs)
Working depth adjustment wheels
9 pcs
12 pcs
– Tyre size
18,5 x 8,50 – 8 AW
18,5 x 8,50 – 8 AW
Support wheels
9 pcs
12 pcs
– Tyre size
280/70-18″
280/70-18″

Check out all sowing machine models

Tilaa uutiskirje

Saat parhaat vinkit ja uutiset

Kirjoita sähköpostiosoitteesi alle ja saat ensimmäisenä PEL-Tuote Oy:n kuumimmat uutiset ja tiedot uutuuksista! Spämmiksi asti ei postia kerry.